Connect with KTO

3D Scanning for Digital Manufacturing* (24 hours)

Banner_3D Scanning for Digital Manufacturing

*This is a non-WSQ module.

Introduction

3D scanning is the process of converting a physical object into a digital format, facilitating digitalisation in manufacturing. Using a 3D scanner, the shape and geometry of the object is collected from various angles and reconstructed, this results in a 3D model in digital format such as stl or stp file. The acquired 3D data can be used for:

First article inspection
Quantification of geometrical changes like deformation
CAD/CAM machining for production
Reverse engineering

This enables process and product optimization in a smart manufacturing environment.

About the Programme

The attendees will become familiar with the principles of common 3D scanners based on laser, white light and x-ray technologies. Three-dimensional scanning approaches for both external and internal features, from simple to complex parts with varying surface finish will be described in detail. Common 3D measurements and simple reverse engineering approaches using will be explained.

This course consists of 3 full-day sessions including: a hands-on session using 3D scanners, data analysis, and reverse engineering. By the end of the course, the attendees will be able to recommend suitable 3D scanning technologies for their applications, and have a better appreciation for digital manufacturing.

Who Should Attend

The course is suitable for those who are currently employed or wish to be employed in the manufacturing related fields. A typical candidate profile could be:

Quality control manager/engineer/technician
Process technician/engineer
Production supervisor/manager
Individuals and staff who are seeking capability improvement in terms of advanced and digital manufacturing

What our Trainees say

Very good and structured course to provide more info on 3D scanning technologies. Engaging lessons that involve hands-on experience.
Mr Sairin Bin Sani,
Participant from Jan 2024 intake

The course provides good insight on the latest technologies which I could apply to potential problems I am facing in my daily work.
Mr Jeremy Lau,
Participant from Jan 2024 intake

Course Outline

The programme employs the Learn-Practise-Implement™ (LPI™) pedagogy, where fundamental knowledge and principles taught will be reinforced with hands-on practices.

Key focus areas or applications:

3D Scanning: Introduction and types of technologies
Reverse engineering
3D Scanning: Data acquisition and measurement
Industrial 3D scanning applications

UPON COMPLETION OF THIS COURSE

Participants will be awarded with a Certificate of Attendance (COA) by SIMTech and/or ARTC if they meet the following criteria:

Achieve at least 75% course attendance;
Take all assessments; and
Pass the course.

Note: Trainees will have to bear the full courses fee upon failure to meet either one of the criteria.

Pre-Requisites

Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
Proficiency in written and spoken English.

Full Course Fee

The full course fee for this course is $1,920 before funding and prevailing GST.

Nett Course Fee

International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and older (MCES) ²	SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹
$2092.80	$627.84	$243.84	$243.84

All fees are inclusive of GST 9%.

Please note that fees and funding amount are subject to change.

LONG TERM VISIT PASS PLUS (LTVP+) HOLDERS

The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.
All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.

ENHANCED TRAINING SUPPORT FOR SMALL & MEDIUM ENTERPRISE (SMEs) SCHEME (ETSS)

The ¹Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS) is for company-sponsored participants who are subject to the eligibility criteria shown below:

SMEs that meet all of the following eligibility criteria:

Registered or incorporated in Singapore
Employment size of not more than 200 or with annual sales turnover of not more than $100 million

SME-sponsored Trainees:

Must be Singapore Citizens or Singapore Permanent Residents.
Courses have to be fully paid for by the employer.
Trainee is not a full-time national serviceman.

Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are NOT eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible.

SKILLSFUTURE MID-CAREER ENHANCED SUBSIDY (MCES)

The ²SkillsFuture Mid-Career Enhanced Subsidy (MCES) is meant for employer-sponsored and self-sponsored Singapore Citizens aged 40 years old and above.

SkillsFuture Credit

All Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit (Opening SkillsFuture Credit and One-off SkillsFuture Credit Top Up) which can be used to offset course fees (for self-sponsored registrations only).

For more information on the SkillsFuture funding schemes you are eligible for, please visit www.skillsfuture.gov.sg

How course fees are calculated

TYPE	CATEGORY OF INDIVIDUALS
	International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above	SMEs-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders)
	FUNDING SOURCE
	Not applicable for SkillsFuture Funding	SkillsFuture Funding (Baseline)	SkillsFuture Mid-career Enhanced Subsidy (MCES) ²	SkillsFuture Enhanced Training Support for SMEs (ETSS) ¹
Full Course Fee	$1,920	$1,920	$1,920	$1,920
SkillsFuture Funding	Not Applicable	($1,344)	($1,728)	($1,728)
Nett Course Fee	$1,920	$576	$192	$192
GST 9%	$172.80	$51.84*	$51.84*	$51.84*
Total Nett Course Fee Payable to Training Provider	$2,092.80	$627.84	$243.84	$243.84

* Based on 30% of Full Course Fee

Contact Us

For technical enquiries, please contact:

Ms Pooja Chaturvedi,
Email: poojac@ARTC.a-star.edu.sg

For general enquiries, please contact:

Dr Edwin SOH,
Email: edwin-soh@ARTC.a-star.edu.sg

Registration

Please register for this course through our Course Registration Form for Public Classes.
For the first question, please select "Modular Programmes".
Applicants will be placed on our waiting list if the course does not have an upcoming scheduled intake.
Once the next intake is confirmed to commence, SIMTech will contact the applicants to share the class information.

Collateral

Download brochure

Schedule

Module	Skills Course Reference Number	Next Intake(s)'s Training Period (Click on the dates to view its schedules)	Registration Status
3D Scanning for Digital Manufacturing (24 hours)	TGS-2023036454	17, 18 & 19 Sep 2024 The Sep 2024 intake is postponed. We will publish a new schedule soon.	SIGN UP Now

Note: SIMTech and ARTC reserve the right to change the class/schedule/course fee or any details about the course without prior notice to the participants.

Announcement:

From 1 Oct 2023, attendance-taking for SkillsFuture Singapore (SSG)'s funded courses must be done digitally via the Singpass App. More information may be viewed here.

Sessions

: Full day

: Morning