Connect with KTO

IMPLEMENT FUNDAMENTALS OF CORROSION AND CORROSION PREVENTION (42 HOURS)

introduction

Corrosion is a multidisciplinary issue affecting almost all industrial sectors around the world. Losses due to corrosion are enormous and the economic impacts are significant, highlighting the dire need for a proactive approach to corrosion prevention and control. However, the lack of knowledge and experience in corrosion and corrosion protection among local technical managers, designers, engineers, and technicians remains one of the main obstacles to effective action in the industry.

This module covers the fundamentals of corrosion-related issues in the industry and is designed to equip participants with the basic fundamentals of corrosion and its evaluation. It mainly covers the following three key topics:

Corrosion Fundamentals and Consequences
This includes the dangers associated with corrosion, different types of corrosion and their mechanisms, and the basics of the corrosion process.
Overview of Corrosion Control and Rectification
This session starts with an introduction to corrosion control methods, followed with details of surface preparation according to standards, coating application, quality control/inspection, and corrosion rectifications. Case studies on corrosion problems arising from coating failures will also be shared during classroom lectures.
Corrosion Characterisation and Testing
This section covers corrosion testing and characterisation techniques and procedures in industrial practices. Participants will get the opportunity to gain hands-on experiences via laboratory sessions and field tests commonly used for corrosion testing/investigations. Relevant international standards for field and laboratory accelerated tests will also be studied.

The comprehensive structure of this module incorporates classroom lectures, hands-on experimental work, and suitable case studies to represent a wider cross-section of the rudiments and evaluation of corrosion.

Who Should Attend

The module will be beneficial to technical managers, designers, engineers, and technicians dealing with corrosion-related issues at their respective fields of employment. Given the interdisciplinary nature of this subject, the personnel could be from any of Singapore’s industrial sectors including, but not limited to, oil and gas, marine, chemicals, food and beverages, manufacturing, infrastructure (power, water, roads, and transport), and construction, etc.

Why This Course

The module equips participants with the basic knowledge and skills critical for the evaluation of real-time corrosion-related issues and for specifying pertinent remedies/preventive approaches to combat the problems. This will help them to not only upgrade their professional skills, but also enhance their career growth opportunities.

For companies, the benefits of having a more knowledgeable workforce are three-fold: It would help reduce potential operational failures/damages, improve overall efficiency, and increase operational savings.

Upon Completion of this Course

Electronic Statement of Attainment (SOA) certificates (in OpenCerts Formats) will be issued by SkillsFuture Singapore (SSG) to participants who have attended and attained competency in the Singapore Skills Framework training modules.

Participants must also meet the following criteria to receive their SOAs:

Achieve at least 75% course attendance;
Take all assessments; and
Pass the course.

Find out more about the WSQ SOA certificate.

Note: Trainees will have to bear the full course fee upon failure to meet either one of the criteria.

Sample: Statement of Attainment (SOA) Certificate SSG SOA

Pre-Requisites

Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
Proficiency in written and spoken English.

Full Course Fee

The full course fee for this course is $3,000 before funding and prevailing GST.

Nett Course Fee

International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above (MCES) ²	SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹
$3,270	$981	$381	$381

All fees are inclusive of GST 9%.

Please note that fees and funding amount are subject to change.

LONG TERM VISIT PASS PLUS (LTVP+) HOLDERS

The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.
All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.

ENHANCED TRAINING SUPPORT FOR SMALL & MEDIUM ENTERPRISE (SMEs) SCHEME (ETSS)

The ¹Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS) is for company-sponsored participants who are subject to the eligibility criteria shown below:

SMEs that meet all of the following eligibility criteria:

Registered or incorporated in Singapore
Employment size of not more than 200 or with annual sales turnover of not more than $100 million

SME-sponsored Trainees:

Must be Singapore Citizens or Singapore Permanent Residents.
Courses have to be fully paid for by the employer.
Trainee is not a full-time national serviceman.

Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are NOT eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible.

SKILLSFUTURE MID-CAREER ENHANCED SUBSIDY (MCES)

The ²SkillsFuture Mid-Career Enhanced Subsidy (MCES) is meant for employer-sponsored and self-sponsored Singapore Citizens aged 40 years old and above.

SkillsFuture Credit

All Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit (Opening SkillsFuture Credit and One-off SkillsFuture Credit Top Up) which can be used to offset course fees (for self-sponsored registrations only).

For more information on the SkillsFuture funding schemes you are eligible for, please visit www.skillsfuture.gov.sg

Note:

This course is eligible for SkillsFuture Credit (Mid-Career) only if you sign up and enrolled under the SkillsFuture Career Transition Programme (SCTP).
If you are applying only for this module, you can still use your Opening SkillsFuture Credit and One-Off SkillsFuture Credit Top Up to offset the course fee as a self-sponsored participant.

How course fees are calculated

TYPE	CATEGORY OF INDIVIDUALS
	International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above	SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders)
	FUNDING SOURCE
	Not applicable for SkillsFuture Funding	SkillsFuture Funding (Baseline)	SkillsFuture Mid-career Enhanced Subsidy (MCES) ²	SkillsFuture Enhanced Training Support for SMEs (ETSS) ¹
Full Course Fee	$3,000	$3,000	$3,000	$3,000
SkillsFuture Funding	Not Applicable	($2,100)	($2,700)	($2,700)
Nett Course Fee	$3,000	$900	$300	$300
GST 9%	$270	$81*	$81*	$81*
Total Course Fee Payable to Training Provider	$3,270	$981	$381	$381

* Based on 30% of Full Course Fee

Contact Us

For technical enquiries, please contact:

Dr TAN Yong Teck,
Email: Tan_Yong_Teck@hq.a-star.edu.sg

For general enquiries, please contact:

Mr GOH Chee Chien,
Email: gohcc@SIMTech.a-star.edu.sg

Registration

Please register for this course through our Course Registration Form for Public Classes.
For the first question, please select "Modular Programmes".
Applicants will be placed on our waiting list if the course does not have an upcoming scheduled intake.
Once the next intake is confirmed to commence, SIMTech will contact the applicants to share the class information.

Collateral

Download brochure

Schedule

Module	Skills Course Reference Number	Next Intake(s)'s Training Period (Click on the dates to view its schedules)	Registration Status
Implement Fundamentals of Corrosion and Corrosion Prevention (42 hours)	TGS-2018502753	19 Mar 2025 - 7 May 2025	SIGN UP Now

Note: SIMTech and ARTC reserve the right to change the class/schedule/course fee or any details about the course without prior notice to the participants.

Announcement:

From 1 Oct 2023, attendance-taking for SkillsFuture Singapore (SSG)'s funded courses must be done digitally via the Singpass App. More information may be viewed here.

Sessions

: Full day