Personal Details

This page is maintained by .

Mr. WONG Ten It

Senior Specialist II

Staff

Nanofabrication (NFB) Department

63194865

wongti@imre.a-star.edu.sg

2 Fusionopolis Way. Innovis, #08-03, Singapore 138634.


Research Details


a.       Thin film growth

b.       Nanofabrication

c.       Micro Total Analysis System

d.       Sensors and Actuators


a.       Theoretical Modelling and Numerical Calculation

b.       Nanofabrication

c.       XRD Characterizations

d.       Thin film deposition


  • Epitaxial ZnO film growth by PVD.
  • Vertical High power LED.
  • Development of Highly Sensitive Localized Surface Plasmon Resonance Technology Platform for Point-Of-Care Clinical Screening and Medical Diagnostics.
  • New Peening Process Performance Comparison Study for Aluminum Alloy 7050-T7451 and Titanium Alloy 6AI-4V M.A.
  • Nanohole Array Biochip Based Point-of-Care System for Procalcitonin Measurement.
  • Impact of Carbon Nanotubes on Wear Resistant Ceramic Coating (Chrome Carbide and Tungsten Carbide)
  • Portable micro total analysis system for rapid on-site determination of environmental TCLP metals in waste materials.
  • Replacement of Hexavalent Chrome in Anodizing of Aluminum
  • Automated Coverage Control Methodology for Shot Peening
  • Feb 2007-Current
Research Engineer, Institute of Material Research and Engineering
  • M.Sc. (Physics), National University of Singapore, 2013.
  • Msc(Theoretical Physics), Universiti Sains Malaysia, Malaysia, 2006.
  • BSc(Pure Physics), Universiti Sains Malaysia, Malaysia, 2003.
  • Institution of Engineers Singapore (IES) Prestigious Engineering Achievement Awards 2016. Project title: Rapid diagnosis of sepsis using a plasmonic sensor based point of-care system.


a.       S. Zhuk, T. K. S. Wong, E. Tyukalova, A. Guchhait, D. H. L. Seng, S. Tripathy, T. I. Wong, M. Sharma, H. Medina, M. Duchamp and L. H. Wong and G. K. Dalapati. Applied Surface Science, 471, 277 (2019). Effect of TaN intermediate layer on the back contact reaction of sputter-deposited Cu poor Cu2ZnSnS4 and Mo.  

b.       S. L. Wang, Y. Zhu, X. Luo, Y. Huang, J. W. Chai, T. I. Wong and G. Q. Xu, Advanced Functional Materials, 28, 1705357 (2018). 2D WC/WO3 Heterogeneous Hybrid for Photocatalytic Decomposition of Organic Compounds with Vis-NIR Light.

c.       M. J. Tan, H-C Pan, H. R. Tan, J. W. Chai, T. I. Wong, Q. F. Lim, X. Zhou, L-D Liao and K. V. Kong, Advanced Healthcare Materials, 7, 1701113 (2018). Flexible Modulation of CO-Release via Hybridization of Medium and High Nuclearity of Metal Carbonyl Clusters on Graphene Oxide for Stroke Remediation.

d.       A. Patra, T. Ding, M-H. Hong, A. M. Richards, T. I. Wong, X. Zhou and C. L. Drum, Journal of Visualized Experiments (JoVE), 130, e55597 (2017). Using extraordinary optical transmission to quantify cardiac biomarkers in human serum.

e.       S. L. Wang, L. Jing, S. J. Wang, J. E. Wu, T. I. Wong, M. L. Foo, W. Chen, and G. Q. Xu, ACS Catalysis, 7, 6892 (2017). Two-dimensional C/TiO2 Heterogeneous Hybrid for Noble-metal-free Hydrogen Evolution.

f.        Z. G. Liu, T. I. Wong, W. Huang, S. Sridhar and S. J. Wang, Acta Metallurgica Sinica (English Letters), 30, 630 (2017). Effect of surface polishing treatment on the fatigue performance of shot-peened Ti-6Al-4V alloy.

g.       V. X. T. Zhao, T. I. Wong and X. Zhou, Journal of Molecular and Engineering Materials, 5, 1740002 (2017). 3D printing of biosamples: A concise review.

h.       Q. Zhang, L. Wu, T. I. Wong, J. L. Zhang, X. Liu, X. Zhou, P. Bai, B. Liedberg and Y. Wang, International Journal of Nanomedicine, 2017:12, 2307 (2017). Surface Plasmon-Enhanced Fluorescence on Au Nanohole Array for Prostate Specific Antigen Detection.

i.         J. Deng#, T. I. Wong#, L. L. Sun, C. G. Quan and X. Zhou, Microelectronic Engineering, 166, 31 (2016). Acceleration of e-beam lithography by minimized resist exposure for large scale nanofabrication. # means equal contribution.

j.          S. Masudy-Panahh, K. Radhakrishnan, H. R. Tan, Y. Ren, T. I. Wong and G. K. Dalapati, Journal of Physics D: Applied Physics, 49, 375601 (2016). In-situ Codoping of CuO Absorber Layer with Aluminum and Titanium: Impact of Codoping and Interface Engineering on the Performance of CuO Based Heterojunction Solar Cell.

k.       T. I. Wong, J. Limantaro, K. P. Fong, C. Y. L. Tan, C. G. Quan and X. Zhou, Journal of Micromechanics and Microengineering, 26, 065016 (2016). Easy fabrication of high quality nickel mold for deep polymer microfluidic channels.

l.         Y. Wang, L. Wu, T. I. Wong, M. Bauch, Q. Zhang, J. L. Zhang, X. H. Liu, X. Zhou, P. Bai, J. Dostalek and B. Liedberg, Nanoscale, 8, 8008 (2016). Directional Fluorescence Emission Co-Enhanced by Localized and Propagating Surface Plasmons for Biosensing.

m.     M. S. Mirshekarloo, C. K. Ivan Tan, S. C. Lai, Y. Li, L. Zhang, T. I. Wong, M. Rahimabadi, K. Yao and G. S. Samudra, Journal of the American Ceramic Society, 99, 1429 (2016) . Stress Effects on Stabilizing Antiferroelectric Phase in Multilayer Ceramics.

n.       T. I. Wong, H. Wang, F. Wang, S. L. Sin, C. G. Quan, S. J. Wang and X. Zhou, Australian Journal of Chemistry, 69, 431 (2016). Empirical formulae in correlating droplet shape and contact angle.

o.       S. Masudy-Panahh, R. S. Moakhar, C. S. Chua, A. Kushwaha, T. I. Wong and G. K. Dalapati, RSC Advances, 6, 29383 (2016). Rapid thermal annealing assisted stability and efficiency enhancement in sputter deposited CuO photocathode.

p.       G. K. Dalapati, S. Masudy-Panah, T. I. Wong, H. R. Tan and D. Z. Chi, Scientific Reports, 6, 20182 (2016). Color tunable low cost transparent heat reflector using copper and titanium oxide for energy saving application.

q.        S. Masudy-Panahh, R. S. Moakhar, C. S. Chua, H. R. Tan, T. I. Wong, D. Z. Chi and G. K. Dalapati, ACS Applied Materials & Interfaces, 8, 1206 (2016). Nanocrystal engineering of sputter grown CuO photocathode for visible light driven electrochemical water splitting.

r.        T. I. Wong#, H. Wang#, F. Wang, S. L. Sin, C. G. Quan, S. J. Wang and X. Zhou, Journal of Colloid and Interface Science, 467, 245 (2016). Development of A Highly Transparent Superamphiphobic Plastic Sheet by Nanoparticle and Chemical Coating. # means equal contribution.

s.        N. Sharma, H. Keshmiri, X. Zhou, T. I. Wong, C. Petri, U. Jonas, B. Liedberg and J. Dostalek, The Journal of Physical Chemistry C, 120, 561 (2016). Tunable Plasmonic nanohole arrays actuated by a Thermoresponsive Hydrogel Cushion.


a.        A simple, high throughput ultrasonic device for contactless cell lysis applications. Authors: T. I. Wong, X. Zhou, X. T. Zheng and Y. N. Tan. In filing.

b.       Plasmonic biosensing based microfluidics point-of-care system for procalcitonin detection. Authors: L. L. Sun, W. Ng, X. Zhou, Y. S. Leo, T. I. Wong, Application Number: 10201606001Q, Filing Date: 21 July 2016. Converted to PCT and filed as "Biomarker detection system", PCT/SG2017/050372, 21 July 2017.

c.       Method of using gold nanostructures to enhance the quantum dot emission with large emission-excitation wavelength gap. Authors: H. Y. Song, T. I. Wong, A. V. Sadovoy, X. Zhou, P. Bai and L. Wu. Singapore Patent Application: 2014008098. Filing Date: 04 February 2014. United States of America Patent Application No. 14/613,649, Filing Date: 4 February 2015.


Last updated on : 03 Apr 2019 02:32 PM