Events

Workshop on Machine Vibration, Analysis and Reduction Techniques

Date: 26 Nov 2008 - 26 Nov 2008

Venue: SIMTech Training Room 1, Level 3

Introduction
Suppressing unwanted vibration is one of the critical issues in developing precision machinery and equipment, especially high-speed and ultra-precision machines. As conventional strength-based structural design and analysis approaches become inadequate to tackle this issue, there is a great need for precision machines to be designed for structural compatibility and vibration minimisation. This one-day workshop is specifically designed to enhance the working knowledge of the participants and provide them with lab demonstrations on structural analysis and vibration testing. With industrial examples, the workshop will cover both fundamental concepts and advanced issues related to mechanical vibration, vibration testing and instrumentation, finite element structural analysis, and vibration control techniques.

Programme
8.45am   Registration

9.00am   Welcome Address by Dr Yang Guilin, Group Manager, Mechatronics
              Group

9.10am   Machine Vibration and Reduction Techniques (Dr Sureshkumar 
              Perinpanayagam) 

10.30am  Tea Break & Networking

10.45am  Finite Element Modelling of Structural Vibration (Dr Lin Wen Jong)

12.00pm  Lunch 

1.00pm    Modal Testing and Analysis (Mr Lim Chee Wang and Dr
               Sureshkumar Perinpanayagam) 

3.00pm    Tea Break

3.45pm    Model Correlation, Model Correction and Case Studies (Dr Lin Wen 
               Jong)

5.00pm    End of the workshop 

Who Should Attend

Engineers involved in design, development and trouble-shooting of high-precision and high-speed machinery and equipment will find this workshop very useful. In addition, the workshop will also be very relevant to those who have interests in structural analysis and vibration control.

For a copy of the workshop brochure, please click here.
Registration closed.

Registration Fee
Pre-registration for the workshop is necessary. Fee inclusive of 7% GST, workshop material, lunch and refreshments.

Non-SMS member: S$100
SMS member: S$80 (after 20% discount)

All cheques/bank drafts should be made payable to 'Singapore Institute of Manufacturing Technology', crossed and marked "A/C payee only". 

SIMTech members enjoy 20% discount, terms and conditions apply. (Limited to 2 participants for Category I members, and 4 participants for Category II members). 

Enquiries on SMS Membership
Please contact Devi at 6793 8388 or email SMS@SIMTech.a-star.edu.sg for more details.

Enquiries
Technical enquiries: 
Dr Sureshkumar Perinpanayagam at Tel: 6793 8538 
Email: sureshkumar@SIMTech.a-star.edu.sg 

General enquiries:
Alice at Tel: 6793 8249
Email: Alicekoh@SIMTech.a-star.edu.sg