Researcher Portfolio

Gan Oon Peen (Dr)
Group Manager
Manufacturing Execution and Control
Introduction:Dr Gan Oon Peen is a research scientist and group manager at the Singapore Institute of Manufacturing Technology and a technical lead at the National RFID Centre Singapore. He received his Ph.D from National University of Singapore in 1997 and completed his post doctorate research at the Centre for Process System Engineering, Imperial College London.

His research interests are in the area of intelligent factory control and prognostic health management, in particular, intelligent control, discrete event system modeling and control, data mining, operation research, and industrial automation. As a group manager, he leads a team of 28 researchers to develop novel technologies in the area of real-time factory visibility and decision support, energy efficient operations and optimal resource control, remote equipment monitoring and diagnostics, and in-situ process monitoring and optimization for empowering factory responsiveness. As a technical lead, Dr Gan played a key role in initiating the National RFID Centre and he also oversees over 20 RFID projects.

Dr Gan is adjunct associate professor, Department of Electrical & Computing Engineering, National University of Singapore. He is also the adjunct associate professor, School of Electrical & Electronic Engineering, Nanyang Technological University
Research Interest:Intelligent Control, Discrete Event System Modeling and Control, Cooperative Control, Supervisory Control, RFID System.
BioNotes:PhD, National University of Singapore (1997)

BEng, National University of Singapore (1992)
Publications:C.K. Pang, C. V.Le, F. L. Lewis, O. P. Gan, H. L. Chan, M. Lou, X.M. Chee, D.H. Zhang, "Intelligent Energy Audit and Machine Scheduling for Energy-Efficient Manufacturing", Submitted to IEEE ICCA 2011.

C.K. Pang, C. V. Le, F. L. Lewis, O. P. Gan, H. L. Chan, "Intelligent Dynamic Resource Assignment for Energy-Efficient Workflow Systems, Submitted to IEEE Transactions on Automation Science And Engineering, 2011.

C.K. Pang, C. V.Le, F. L. Lewis, O. P. Gan, H. L. Chan, M. Lou, X.M. Chee, D.H. Zhang, "Classification of Energy Consumption Patterns for Energy Audit and Machine Scheduling in Industrial Manufacturing Systems", Submitted to Transactions of the Institute of Measurement and Control, 2011.

O. Massol, X. Li, R. Gouriveau, J. H. Zhou and O. P. Gan, "An exTS based Neuro-Fuzzy Algorithm for Prognostics and Tool Condition Monitoring", The 11th International Conference on Control, Automation, Robotics and Vision (ICARCV2010), 07-Dec-2010 to 10-Dec-2010, Singapore.

S. Linn, M. J. Er, X. Li, L. Y. Zhai, A. J. Torabi and O. P. Gan, "An Enhanced Online Self-organizing Fuzzy Neural Network", The 11th International Conference on Control, Automation, Robotics and Vision (ICARCV2010), 07-Dec-2010 to 10-Dec-2010, Singapore, vol. 1, pp. 1740-1800.

A. J. Torabi, O. Massol, M. J. Er, X. Li, B. S. Lim, O. P. Gan, S. Huang, L. Y. Zhai and S. Linn, "Flute based Analysis of Ball-Nose Milling Signals Using Continuous Wavelet Analysis Features", The 11th International Conference on Control, Automation, Robotics and Vision (ICARCV2010), 07-Dec-2010 to 10-Dec-2010, Singapore, vol. 1, pp. 1359-1364.

A. J. Torabi, M. J. Er, X. Li, B. S. Lim, L. Y. Zhai, S. Huang, S. Linn, O. P. Gan, "Fuzzy Clustering of Wavelet Features for Tool Condition Monitoring in High Speed Milling Process", International Conference of the Prognostics and Health Management Society (PHM), 2010.

L. Y. Zhai, M. J. Er, X. Li, O. P. Gan, S. J. Phua, S. Huang, J. H. Zhou, S. Linn, A. J. Torabi, "Intelligent Monitoring of Surface Integrity and Cutter Degradation in High-speed Milling Processes", International Conference of the Prognostics and Health Management Society, 2010.

S. Huang, X. Li, O. P. Gan, "Tool Wear Estimation using Support Vector Machines in Ball-nose End Milling", International Conference of the Prognostics and Health Management Society, 2010.

X. Li, B.S Lim, O.P. Gan and J. H. Zhou, M. J. Er, "Fuzzy Regression Modeling for Tool Performance Prediction and Degradation Detection", International Journal of Neural Systems, vol. 20(5), pp. 405-419 (Oct-2010)

O.P. Gan, C.C. Tan, S.C. Wang, G.C. Tan, Y.Z. Zhao, "Event Cycle and Device Control in RFID Middleware", International Conference of IEEE Industrial Informatics, pp 1262-1266, 2008

O.P. Gan, S.C. Wang, "Parameter Estimation of RFID Network Traffic Load", Annual Conference of IEEE Industrial Electronics Society, Vol.1, pp 34-39, 2007

B. S. Lim, G. H. Phua, L. L. Aw, T. K. Tan, O. P. Gan, "RFID-based Proactive EDM Electrode Setup Optimisation System - Case Study", Vol. 1;pp. 2974-2979, IEEE Industrial Electronics Society (IECON) 2007, Taiwan

O.P. Gan, "Discrete Event System Modeling and Dynamic Service Allocation for RFID Networks", Annual Conference of IEEE Industrial Electronics Society, Vol.11, pp 4767-4772, 2006
Awards:2008 Ministry of Trade and Industry and A*STAR Borderless Award - In recognition and reward staff and teams who exemplify borderless values through proactive cross agencies collaboration respectively.