*This is a non-WSQ module.
- This programme is co-organised with A*STAR National Metrology Centre (NMC).
Basic Metrology and Measurement Quality Assurance* (16 Hours)
Introduction
A*STAR’s course on “Basic Metrology and Measurement Quality Assurance” is designed to provide engineering professionals with the essential skills needed to ensure reliable and accurate measurements in their work. Participants will establish a strong foundation in metrological principles, focusing on measurement uncertainty analysis, the development of calibration procedures, and the interpretation of calibration reports. Understanding measurement uncertainty and identifying its components in the measurement process are crucial for effectively expressing measurement results in design or manufacturing across various industries and calibration laboratories.
Through hands-on learning and practical applications, the course allows participants to develop competencies in designing metrology recipes, evaluating measurement performance, conducting uncertainty analysis, troubleshooting instrument issues, and implementing effective measurement quality assurance practices.
Why This Course
- Tailored to meet the latest needs of local industries
- Practical, hands-on learning that can be immediately applied
- Comprehensive understanding of measurement uncertainty and metrology principles
- Real-world case studies that highlight industrial applications
- Valuable for managing measurement uncertainty in emerging fields, such as Carbon Removal Measurement, Reporting, and Verification (MRV), etc
- Instructed by an expert trainer with extensive experience in metrology
Who Should Attend
This programme is designed for professionals working in measurement and quality assurance, including metrologists, calibration and testing engineers, measuring instrument suppliers, QA/QC personnel, process control engineers, and research and development engineers.
Participants will build competencies to manage metrology recipes, evaluate measurement performance, and troubleshoot instrument issues.
The knowledge acquired in this course is also valuable for understanding and managing measurement uncertainty in emerging fields such as Carbon Removal Measurement, Reporting, and Verification (MRV), etc.
What You Will Learn
This course provides both theoretical knowledge and practical skills in metrology and measurement quality assurance, including how to:
- Understand the fundamentals of metrology
- Identify and apply metrology recipes used in calibration and testing laboratories
- Develop and manage procedures that comply with international standards such as IEC and ISO
- Apply the Guide to the Expression of Uncertainty in Measurement (GUM)
- Evaluate measurement performance using uncertainty analysis
- Diagnose and troubleshoot instrument abnormalities based on measurement results
- Recommend and implement follow-up actions to ensure measurement quality assurance
Upon Completion Of This Course
Participants will be awarded with a Certificate of Attendance (COA) by A*STAR if they meet the following criteria:
- Achieve at least 75% course attendance;
- Take all assessments; and
- Pass the course.
Note: Trainees will have to bear the full course fee upon failure to meet either one of the criteria.
Pre-Requisites
- Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
- Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
- Proficiency in written and spoken English.
Full Course Fee
The full course fee for this course is $1,600 before funding and prevailing GST.
Nett Course Fee
| International Participants |
Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders | Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above (MCES) ² | SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹ |
|---|---|---|---|
| $1,744 | $523.20 | $203.20 | $203.20 |
Please note that fees and funding amount are subject to change.
Long Term Visit Pass Plus (LTVP+) Holders
- The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.
- All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.
Enhanced Training Support For Small & Medium Enterprise (SMES) Scheme (ETSS)
-
The ¹Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS) is for company-sponsored participants who are subject to the eligibility criteria shown below:
|
SMEs that meet all of the following eligibility criteria:
SME-sponsored Trainees:
Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are NOT eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible. |
SkillsFuture Mid-Career Enhanced Subsidy (MCES)
- The ²SkillsFuture Mid-Career Enhanced Subsidy (MCES) is meant for employer-sponsored and self-sponsored Singapore Citizens aged 40 years old and above.
SkillsFuture Credit
- All Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit (Opening SkillsFuture Credit), which can be used to offset course fees (for self-sponsored registrations only).
How Course Fees are Calculated
| TYPE | CATEGORY OF INDIVIDUALS | |||
| International Participants | Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders | Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above | SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) | |
| FUNDING SOURCE | ||||
| Not applicable for Funding Support | SkillsFuture Funding (Baseline) | SkillsFuture Mid-career Enhanced Subsidy (MCES) ² | SkillsFuture Enhanced Training Support for SMEs (ETSS) ¹ | |
| Full Course Fee | $1,600 | $1,600 | $1,600 | $1,600 |
| Funding Support | Not Applicable | ($1,120) | ($1,440) | ($1,440) |
| Nett Course Fee | $1,600 | $480 | $160 | $160 |
| GST 9% | $144 | $43.20* | $43.20* | $43.20* |
| Total Nett Course Fee Payable to Training Provider | $1,744 | $523.20 | $203.20 | $203.20 |
About the Trainer
- Dr Thomas Wu
- Lead Metrologist and Assistant Director
A*STAR National Metrology Centre (NMC)
Dr Thomas Wu
Lead Metrologist and Assistant Director
A*STAR National Metrology Centre (NMC)
A*STAR National Metrology Centre (NMC)
Dr Thomas Wu is a Lead Metrologist and Assistant Director in the Mechanical Department of A*STAR National Metrology Centre (NMC), with over 20 years of experience across diverse metrology fields. His expertise spans acoustics, vibration, rotation, THz/microwave and AC electrical measurements, low-current and noise analysis, gas mixture and purity analysis, LNG flow/density/energy measurement, aerosol particles, light scattering, displacement, laser interferometry, measurement uncertainty, and statistical analysis.
Dr Wu has also served as a peer reviewer for other National Metrology Institutes and as a Technical Assessor under the Singapore Laboratory Accreditation Scheme (SAC-SINGLAS) across electrical, mechanical, and chemical calibration. Additionally, he was a member of the SAC Technical Committee for Proficiency Testing. He has published over 70 papers in journals and conferences, and contributed to Technical Reference (TR) 56 on LNG Bunkering, TR 129 on Methanol Bunkering, and TR 140 on Quality Specifications for Marine Biofuel.
Registration
- Please register for this course through our online form: Course Registration Form for Public Classes.
- For the first question, please select "Modular Programmes (Standalone Modules".
- Applicants will be placed on our waiting list if the course does not have an upcoming scheduled intake.
- When the next intake is confirmed, a confirmation email with payment information will be sent to applicants to finalise their participation.
Contact Us
| Technical Enquiries | General Enquiries |
|
Dr Thomas WU, |
Knowledge Transfer Office, Email: KTO-enquiry@a-star.edu.sg |
Schedule
|
Module
|
Skills Course Reference Number | Next Intake(s)' Training Period (Click on the dates to view their schedules) |
Registration Status |
|
TGS-2026063854 |  26 & 27 Aug 2026 |
Registration for the Aug 2026 intake closes on 12 Aug 2026. |
Note: A*STAR SIMTech and A*STAR ARTC reserve the right to change the class/schedule/course fee or any details about the course without prior notice to the participants.
Announcement:
- From 1 Oct 2023, attendance-taking for SWDA-approved/SWDA-funded courses must be done digitally via the Singpass App. More information may be viewed here.
- Participants will be provided with digital course materials when attending our courses. Please note that printed copies will not be available.
Sessions
: Full day
: Morning
: Afternoon
: Evening