Control In Automation Systems (42 Hours)

This module is offered under the Industrial Automation (IA) specialisation.

Introduction

The launch of the Industrial Transformation Maps (ITMs) by the Singapore Government in 2016 encouraged and supported local industries in adopting robotics and automation technologies to advance manufacturing capabilities and improve productivity. However, the adoption of automation technologies and the realisation of effective automation solutions require in-depth knowledge and relevant skill sets.

This course covers the various hardware and software components required to set up an automation control system. Participants will also learn to perform motion profile design, planning and tuning to achieve specific performance indicators, such as throughput and process repeatability, as well as enable remote control and monitoring. relevant skill sets.

Participants will develop competencies in planning, selecting, designing and using components and systems for automation motion control systems.

Why This Course

Real-world projects implementation mimicking high throughput automation, robotics pick-and-place automation or local-remote control and monitoring are discussed and put into practice during sessions
Highly practical course content delivered in an intensive and interactive manner
Gain understanding on the latest automation technology for control, sensors and communications
Case studies highlighting applications of knowledge in manufacturing automations

Who Should Attend

This course targets at mechatronics/mechanical/electrical/control engineers, precision machines and automation systems designers and researchers, process engineers and plant supervisors related to manufacturing equipment and automation systems.

What Our Trainees Say

This course let me understand in more detail how the PID controllers work. This enables me to understand the important functions of the system, and how to adjust the control to maintain a consistent output of the process. A course that I will strongly recommend others to attend.

Mr Leong Yew Wing Mervin,
Participant from Aug 2024 intake

What You Will Learn

The course covers the following performance statements:

Script Programming for Automating Systems
Configuring for Local-Remote Control and Monitoring
Motion control for High-throughput Automation
Smart Sensors: Understanding the Specifications
Communication Devices Selection

Upon Completion of This Course

Upon Completion of this Course

Participants who successfully complete the required training and attain competency in this module will be awarded a Statement of Attainment (SOA) by the Skills & Workforce Development Agency (SWDA).

The WSQ SOA reflects the Skills Standard title attained by the learner under the national Skills Framework and identifies the training provider. With effect from 1 July 2026, the SOA will also include the title of the completed course, providing clearer context on the course content and competency attained for better recognition by employers.

For this course, the SOA will indicate the following Skills Standard title:
Enhance Control Performance of Precision Machines to Satisfy Manufacturing Requirements

Participants must also meet the following criteria to receive their SOAs:

Achieve at least 75% course attendance;
Take all assessments; and
Pass the course.

Note: Trainees will have to bear the full course fee upon failure to meet either one of the criteria.

Find out more about the WSQ SOA certificate

Why Your Statement of Attainment (SOA) Shows a Skills Standard Title

The above image shows an example of a Statement of Attainment (SOA) issued from 1 July 2026.

The Statement of Attainment (SOA) issued by the Skills & Workforce Development Agency (SWDA) reflects the relevant Skills Standard title, such as a Technical Skills and Competency (TSC) title. This is because the SOA is aligned with the national Skills Framework, ensuring consistent recognition of competencies across industries and among employers.

While the course title describes the learning experience, the Skills Standard title identifies the specific nationally recognised competency attained.

Pre-Requisites, Full and Nett Course Fees

Pre-Requisites

Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
Proficiency in written and spoken English.

Full Course Fee

The full course fee for this course is $4,000 before funding and prevailing GST.

Nett Course Fee

International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above (MCES) ²	SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹
$4,360	$1,308	$508	$508

All fees are inclusive of GST 9%.

Please note that fees and funding amount are subject to change.

Long Term Visit Pass Plus (LTVP+) Holders

The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.
All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.

Enhanced Training Support For Small & Medium Enterprise (SMES) Scheme (ETSS)

The ¹Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS) is for company-sponsored participants who are subject to the eligibility criteria shown below:

SMEs that meet all of the following eligibility criteria:

Registered or incorporated in Singapore
Employment size of not more than 200 or with annual sales turnover of not more than $100 million

SME-sponsored Trainees:

Must be Singapore Citizens or Singapore Permanent Residents.
Courses have to be fully paid for by the employer.
Trainee is not a full-time national serviceman.

Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are NOT eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible.

SkillsFuture Mid-Career Enhanced Subsidy (MCES)

The ²SkillsFuture Mid-Career Enhanced Subsidy (MCES) is meant for employer-sponsored and self-sponsored Singapore Citizens aged 40 years old and above.

SkillsFuture Credit

All Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit (Opening SkillsFuture Credit), which can be used to offset course fees (for self-sponsored registrations only).

For more information on the funding support schemes you are eligible for, please visit www.skillsfuture.gov.sg

Note:

This course is eligible for SkillsFuture Credit (Mid-Career) only if you sign up and enrol under the SkillsFuture Career Transition Programme (SCTP).
If you are applying only for this module, you can still use your Opening SkillsFuture Credit and One-Off SkillsFuture Credit Top Up to offset the course fee as a self-sponsored participant.

How Course Fees are Calculated

TYPE	CATEGORY OF INDIVIDUALS
	International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above	SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders)
	FUNDING SOURCE
	Not applicable for Funding Support	SkillsFuture Funding (Baseline)	SkillsFuture Mid-career Enhanced Subsidy (MCES) ²	SkillsFuture Enhanced Training Support for SMEs (ETSS) ¹
Full Course Fee	$4,000	$4,000	$4,000	$4,000
Funding Support	Not Applicable	($2,800)	($3,600)	($3,600)
Nett Course Fee	$4,000	$1,200	$400	$400
GST 9%	$360	$108*	$108*	$108*
Total Nett Course Fee Payable to Training Provider	$4,360	$1,308	$508	$508

* Based on 30% of Full Course Fee

About the Trainers

Registration

Please register for this course through our online form: Course Registration Form for Public Classes.
For the first question, please select "Modular Programmes (Standalone Modules".
Applicants will be placed on our waiting list if the course does not have an upcoming scheduled intake.
When the next intake is confirmed, a confirmation email with payment information will be sent to applicants to finalise their participation.

Collateral

Download brochure

Contact Us

Technical Enquiries	General Enquiries
Dr WANG Yuzhe, Email: wang_yuzhe@a-star.edu.sg	Ms Charlotte LIM, Email: charlotte_lim@a-star.edu.sg

Schedules

Modules	Skills Course Code Reference	Next Intake(s)' Training Period (Click on the dates to view their schedules)	Registration Status
IA M1: Apply Robotics for Manufacturing Automation (42 Hours)	TGS-2019503417	6 Oct 2026 - 26 Nov 2026	SIGN UP Now Registration for the Oct 2026 intake closes on 22 Sep 2026.
IA M2: Automation Components and Systems for Advanced Manufacturing (42 hours)	TGS-2019503415	6 Jul 2026 - 24 Aug 2026	SIGN UP Now The Jul 2026 intake is postponed. We will publish a new schedule for the Q2/Yr 2027 class soon.
IA M3: Control in Automation Systems (42 hours)	TGS-2019504560	The schedule for the next intake is still in the planning stage.
IA M4: Automation Design and Simulation (42 hours)	TGS-2019504747	20 Apr 2026 - 8 Jun 2026	SIGN UP Now The Apr 2026 intake is postponed. We will publish a new schedule soon.

Remarks: Participants are free to complete the industrial automation modules in whichever order they prefer.

Note: A*STAR SIMTech and A*STAR ARTC reserve the right to change the class/schedule/course fee or any details about the course without prior notice to the participants.

Announcement:

From 1 Oct 2023, attendance-taking for SWDA-approved/SWDA-funded courses must be done digitally via the Singpass App. More information may be viewed here.
Participants will be provided with digital course materials when attending our courses. Please note that printed copies will not be available.

Sessions

: Full day

: Morning

: Afternoon

: Evening

Quick Links

Browse our course directory

Subscribe to our mailing list