.png?sfvrsn=843a4005_8)
ENHANCE CONTROL PERFORMANCE OF PRECISION MACHINES (42 HOURS)
Introduction
This course equips participants with the fundamental tools needed to analyse, design and tune controllers with in-depth analysis of key considerations for precision control, such as uncertainty analysis, noise sources and filtering, and metrology and error sources, to name a few. The knowledge gained will enhance the participant’s ability to increase machines’ performance in terms of precision, accuracy, speed and reliability. The participants will also gain awareness of the capabilities of various high-tech equipment and, latest concepts at the forefront of precision engineering for actuation and sensing. Various case studies on error compensation, self-calibration, as well as practical implementation for control in some technology areas such as voice coil motors and permanent magnet linear motors will be used to impart the techniques which can be applied immediately to engineering issues in the day-to-day operation.
Why This Course
- Designed specifically based on local industry demand
- Highly practical and intensive
- Latest knowledge and up-to-date technologies
- Case studies highlighting industrial applications
- Expert trainers in the field with industrial experience
Who Should Attend
This course targets at mechatronics/mechanical/electrical/control engineers, precision machines and automation systems designers and researchers, process engineers and plant supervisors. The course is also relevant for participants from industries, such as precision engineering, electronics, machine tools, automotive, aerospace, optics, semiconductor and etc, where accuracy capability and performance is critical to the production.
What You Will Learn
What you will learn
The course covers the following performance statements:
- Understand the purpose of control systems and basic knowledge of PID (Proportional, Integral, Derivative) control
- Understand the purpose of system modeling
- Understand Permanent Magnet Synchronous Motor (PMSM) principle
- Understand PMSM speed and current control system
- Understand the design of PID control using model based approach
- Distinguish between repeatability, resolution, and accuracy
- Perform steps to calibrate and improve machine performance
- Building mathematical model of a thermal system using thermal equations and perform analysis to determine & select suitable heater
- Understand a servo control system
- Appreciate and evaluate a precision close-loop positioning system
- Construct a servo motor drive system with digital signal controller
- Gain the knowledge on industrial communication interfaces, protocols their limitations and applications
Upon Completion of This Course
Upon Completion of this Course
Electronic Statement of Attainment (SOA) certificates (in OpenCerts Formats) will be issued by SkillsFuture Singapore (SSG) to participants who have attended and attained competency in the Singapore Skills Framework training modules.
Participants must also meet the following criteria to receive their SOAs:
- Achieve at least 75% course attendance;
- Take all assessments; and
- Pass the course.
Find out more about the WSQ SOA certificate.
Note: Trainees will have to bear the full course fee upon failure to meet either one of the criteria.
Pre-Requisites, Full and Nett Course Fees
Pre-Requisites
- Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
- Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
- Proficiency in written and spoken English.
Full Course Fee
The full course fee for this course is $3,000 before funding and prevailing GST.Nett Course Fee
| International Participants | Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders | Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above (MCES) ² | SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹ |
|---|---|---|---|
| $3,270 | $981 | $381 | $381 |
LONG TERM VISIT PASS PLUS (LTVP+) HOLDERS
- The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.
- All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.
ENHANCED TRAINING SUPPORT FOR SMALL & MEDIUM ENTERPRISE (SMEs) SCHEME (ETSS)
The ¹Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS) is for company-sponsored participants who are subject to the eligibility criteria shown below:
SMEs that meet all of the following eligibility criteria:
SME-sponsored Trainees:
Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are NOT eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible. |
SKILLSFUTURE MID-CAREER ENHANCED SUBSIDY (MCES)
- The ²SkillsFuture Mid-Career Enhanced Subsidy (MCES) is meant for employer-sponsored and self-sponsored Singapore Citizens aged 40 years old and above.
SkillsFuture Credit
- All Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit (Opening SkillsFuture Credit and One-off SkillsFuture Credit Top Up) which can be used to offset course fees (for self-sponsored registrations only).
How course fees are calculated
| TYPE | CATEGORY OF INDIVIDUALS | |||
| International Participants | Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders | Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above | SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) | |
| FUNDING SOURCE | ||||
| Not applicable for SkillsFuture Funding | SkillsFuture Funding (Baseline) | SkillsFuture Mid-career Enhanced Subsidy (MCES) ² | SkillsFuture Enhanced Training Support for SMEs (ETSS) ¹ | |
| Full Course Fee | $3,000 | $3,000 | $3,000 | $3,000 |
| SkillsFuture Funding | Not Applicable | ($2,100) | ($2,700) | ($2,700) |
| Nett Course Fee | $3,000 | $900 | $300 | $300 |
| GST 9% | $270 | $81* | $81* | $81* |
| Total Course Fee Payable to Training Provider | $3,270 | $981 | $381 | $381 |
A*STAR celebrates International Women's Day
From groundbreaking discoveries to cutting-edge research, our researchers are empowering the next generation of female science, technology, engineering and mathematics (STEM) leaders.
Get inspired by our #WomeninSTEM