Connect with KTO

APPLY INJECTION MOULDING TOOL DESIGN (51 HOURS)

introduction

Polymer materials are widely used in our daily lives. With advancement of materials and process technologies during the recent years, more applications have been developed for polymer materials in high precision and fast-growing industries such as automotive, aerospace, photonic, computer and medical devices. However, to make good use of the advanced polymer materials, it is essential to have a good understanding of polymeric material properties and the process technologies. The objective of this course is to provide the participants with essential practical skills and a good understanding of polymeric materials processing properties and the injection moulding and mould design technologies. The course comprises injection mould design principles, applications of CAE techniques in mould design and injection moulding processes. Industrial mould design application examples will be introduced and studied through case studies. On completion of this module, participants will be equipped with the knowledge and application skills to employ the injection moulding tool design technology for industrial applications.

Why This Course

Highly practical and intensive
Latest knowledge and up-to-date technology
Case studies highlighting industrial application
Expert trainers in the field with industrial experience

Who Should Attend

This course is designed for engineers, researchers and technicians from the precision engineering, electronics, aerospace, automotive and other relevant industrial sectors.

What you will learn

How to Select Materials for Injection Moulding

Process Polymer materials: properties and industry applications
Polymer materials selection and product design Injection moulding process and mould design
Case Study: Plastic material selection, part design and mould design for high precision biomedical device

How to Apply CAE for Mould Design and Mould Flow Analysis

Mould design using 3D CAD Platform: Pro-E, Auto CAD
Injection mould FEM modelling and boundary condition setup
Mould flow analysis, results interpretation, and process optimisation
Case Study: Design optimisation of injection mould for high precision biomedical device moulding

How to Apply Injection Moulding Process and Troubleshooting Techniques

Injection moulding machine operation and process parameters
Moulded part testing and characterisation techniques
Moulding defects and troubleshooting techniques
Case Study: Injection mould and moulding process development for high precision biomedical device production and quality inspection

Upon Completion of this Course

Electronic Statement of Attainment (SOA) certificates will be issued by SkillsFuture Singapore (SSG) to participants who have attended and attained competency in the Singapore Skills Framework training modules.

Participants must also meet the following criteria to receive their SOAs:

Achieve at least 75% course attendance;
Take all assessments; and
Pass the course.

Find out more about the WSQ SOA certificate.

Note: Trainees will have to bear the full course fee upon failure to meet either one of the criteria.

Sample: Statement of Attainment (SOA) Certificate SSG SOA

Pre-Requisites

Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
Proficiency in written and spoken English.

Full Course Fee

The full course fee for this module is $2,400 before funding and prevailing GST.

Nett Course Fee

International Participants	Singapore Citizens aged 39 years and below, Singapore Permanent Residents and LTVP+ Holders	Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above (MCES) ²	SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹
$2,616	Up to 50% of Course Fee funding	Up to 70% of Course Fee funding	Up to 70% of Course Fee funding

All fees are inclusive of GST 9%.

Please note that fees and funding amount are subject to change.

Long Term Visit Pass Plus (LTVP+) Holders

The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.

All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.

¹ Under the Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS), subject to eligibility criteria shown below.

SMEs that meet all of the following eligibility criteria:

Registered or incorporated in Singapore
Employment size of not more than 200 or with annual sales turnover of not more than $100 million

SME-sponsored Trainees:

Must be Singapore Citizens or Singapore Permanent Residents.
Courses have to be fully paid for by the employer.
Trainee is not a full-time national serviceman.

Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are NOT eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible.

² Under the SkillsFuture Mid-Career Enhanced Subsidy (MCES) for employer-sponsored and self-sponsored Singapore Citizens aged 40 years old and above.

Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit which can be used to offset course fees (for self-sponsored registrations only).

For more information on the SkillsFuture funding schemes you are eligible for, please visit www.skillsfuture.gov.sg

Contact Us

For technical enquiries, please contact:

Mr CHEN Ge,
Email: gchen@SIMTech.a-star.edu.sg

For general enquiries, please contact:

Dr SUN Zheng,
Email: zsun@SIMTech.a-star.edu.sg

Registration

Please register for this course through our Course Registration Form for Public Classes.
For the first question, please select Qn1: Modular Programmes
Applicants will be placed on our waiting list if the course does not have an upcoming scheduled intake.
Once the next intake is confirmed to commence, SIMTech will contact the applicants to share the class information.

Collateral

Download brochure

Schedule

WSQ Module	Skills Course Reference Number	Training Period (Click on dates to view schedules)	Registration Status
Apply Injection Moulding Tool Design (51 hours)	TGS-2018502815

Note: SIMTech and ARTC reserve the right to change the class/schedule/course fee or any details about the course without prior notice to the participants.

Announcement:

From 1 Oct 2023, attendance-taking for SkillsFuture Singapore (SSG)'s funded courses must be done digitally via the Singpass App. More information may be viewed here.
There is an increase of our nett course fees due to GST 9% for all intakes commencing in Year 2024. We will progressively update our collaterals to reflect the new fees by end December 2023.

Sessions

: Full day