KTO Color Logo
More

Connect with us

DIMENSIONAL MEASUREMENTS AND METROLOGY (45 HOURS)

Dimensional Measurements and Metrology

introduction

This module aims to introduce the fundamental concept, theoretical and practical knowledge of precision dimensional measurement technology and nanoscale measurement technology for applications in the precision engineering industry, and as well as other related industrial sectors. Specifically, this course covers the fundamentals of measurement errors, error analysis and uncertainty, geometric dimensioning & tolerancing (GD&T) for measurement purposes, precision measurement systems for dimensional measurements (with a coordinate measuring machine) and surface roughness measurements (with a stylus profilometer and focus variation optical microscope), precision machine tool calibration (by a laser interferometer), confocal technique and atomic force microscopy for nanoscale dimensional measurements.

Why This Course

  • Specifically designed according to current local industry needs
  • Highly practical and intensive
  • Latest knowledge and state-of-the-art technology
  • Case studies highlighting industrial applications
  • Professional trainers with industrial experience

Who Should Attend

This module is designed for

  • Measurement system designers, engineers and technical leaders
  • Quality inspection technicians, engineers and supervisors
  • Sales engineers and managers of optical components and scientific equipment
  • Procurement engineers and officers
  • Accredited testing laboratory engineers and supervisors

What You Will Learn

What You Will Learn

  • Calculate uncertainty based on advanced statistical analysis techniques
  • Analyse error propagation on dimension measurement of actual parts
  • Determine measurement uncertainty caused by thermal variation
  • Perform measurements of dimensions and tolerances of manufactured parts using Coordinate Measuring Machine (CMM) with case studies
  • Define surface topography and understand internationally-recognised parameters
  • Perform measurement of surface topography at different scales and resolutions, using different techniques and case studies
  • Determine measurement errors contributed by machine instrumentation
  • Understand measurement errors and techniques of laser displacement interferometer with case studies

Upon Completion of This Course

Upon Completion of this Course

Electronic Statement of Attainment (SOA) certificates will be issued by SkillsFuture Singapore (SSG) to participants who have attended and attained competency in the Singapore Skills Framework training modules. 

Participants must also meet the following criteria to receive their SOAs: 

  • Achieve at least 75% course attendance;
  • Take all assessments; and
  • Pass the course.

Click here to learn more about the WSQ SOA certificate.

Note: Trainees will have to bear the full course fee upon failure to meet either one of the criteria.


Sample: Statement of Attainment (SOA) CertificateSSG SOA

Pre-Requisites, Full and Nett Course Fees

Pre-Requisites

  • Applicants should possess a degree in any discipline or a diploma with a minimum of 3 years of related working experience.
  • Applicants who do not have the required academic qualifications are still welcome to apply, but shortlisted candidates may be required to attend an interview for special approval.
  • Proficiency in written and spoken English.

Full Course Fee

The full course fee for this module is $3,000 before funding and prevailing GST.

Nett Course Fee

International
Participants
Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders
Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and above (MCES) ² SME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) (ETSS) ¹
$3,240 $972 $372 $372
All fees are inclusive of prevailing GST.

Please note that fees and funding amount are subject to change.

  • Long Term Visit Pass Plus (LTVP+) Holders
    The LTVP+ scheme applies to lawful foreign spouses of Singapore Citizens with (i) at least one Singapore Citizen child or are expecting one from the marriage, or at least three years of marriage, and (ii) where the Singapore Citizen sponsor is able to support the family.

    All LTVP+ holders can be identified with their green visit pass cards, with the word ‘PLUS’ printed on the back of the card.

    • ¹ Under the Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme (ETSS), subject to eligibility criteria shown below.

      SMEs that meet all of the following eligibility criteria:

      • Registered or incorporated in Singapore
      • Employment size of not more than 200 or with annual sales turnover of not more than $100 million

      SME-sponsored Trainees:

      • Must be Singapore Citizens or Singapore Permanent Residents.
      • Courses have to be fully paid for by the employer.
      • Trainee is not a full-time national serviceman. 

      Further Info: This scheme is intended for all organisations, including non-business entities not registered with ACRA e.g. VWOs, societies, etc. Only ministries, statutory boards, and other government agencies are not eligible under Enhanced Training Support for SMEs Scheme. Sole proprietorships which meet all of the above criteria are also eligible.

    Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit which can be used to offset course fees (for self-sponsored registrations only).

    For more information on the SkillsFuture funding schemes you are eligible for, please visit www.ssg.gov.sg


    How course fees are calculated

    TYPECATEGORY OF INDIVIDUALS
    International Participants Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders Employer-sponsored and self-sponsored Singapore Citizens aged 40 years and aboveSME-sponsored local employees (i.e Singapore Citizens, Singapore Permanent Residents and LTVP+ Holders) 
    FUNDING SOURCE
    Not applicable for SkillsFuture FundingSkillsFuture Funding (Baseline)SkillsFuture Mid-career Enhanced Subsidy (MCES) ²SkillsFuture Enhanced Training Support for SMEs (ETSS) ¹
     Full Course Fee $3,000$3,000$3,000  $3,000
    SkillsFuture Funding Not Applicable  ($2,100)  ($2,700)  ($2,700)
    Nett Course Fee $3,000  $900 $300  $300
    8% GST
    $240 $72*  $72*  $72*
    Total Course Fee Payable to Training Provider $3,240 $972 $372  $372
    * Based on 30% of Full Course Fee

    Eligible for SkillsFuture Enterprise Credit (SFEC)

    SkillsFuture Enterprise Credit (SFEC)

    The SkillsFuture Enterprise Credit (SFEC) was first introduced during the Singapore’s Budget 2020 and then recently expanded to a larger group of employers in Budget 2022. It encourages employers to invest in enterprise transformation and capabilities of their employees. Eligible employers will receive a one-off S$10,000 credit to cover up to 90% of out-of-pocket expenses on qualifying costs for supportable initiatives, over and above the support levels of existing schemes.

    Submission of SFEC Claim

    Employers are required to submit their SFEC claims manually via its microsite if they fulfil any of the following scenarios:

    • Employers have sent their foreign employees (excluding foreign employees who hold Long-Term Visit Pass Plus) for training on a SFEC eligible course;

    Employers can only submit the claims for SFEC after their employees have completed the training course(s). Click here to download the SFEC Claim e-guide.

    NOTE: You will require a Corppass account with "EPJS_User" role assigned prior to login to your account to manage your claims.

    If you are unsure whether your company is eligible for SFEC, you may submit an enquiry to Enterprise Singapore (ESG) via here for their response.


    Contact Us

    • For technical enquiries, please contact:

    Ms LIU Yuchan,
    Email: yliu@SIMTech.a-star.edu.sg

    • For general enquiries, please contact:

    Ms Charlott LIM,
    Email: charlotte-lim@SIMTech.a-star.edu.sg


    Registration

    • Please register for this course through our Course Registration Form for Public Classes.
    • For the first question, please select Qn1: Modular Programmes
    • Applicants will be placed on our waiting list if the course does not have an upcoming scheduled intake.
    • Once the next intake is confirmed to commence, SIMTech will contact the applicants to share the class information.

    Schedule

    Module
    Skills Course Reference NumberTraining Period
    (Click on dates to view schedules)
    Registration Status
    • Dimensional Measurements and Metrology (45 hours)
    TGS-2018502749

    Sessions
    FD: Full day
    AM: Morning
    PM Afternoon
    EVE: Evening